How do I connect to SHOUTcast server?
To connect your encoder to World-Stream
worldstream
Last Update setahun yang lalu
1. Choose an Encoder: Select an encoder that is compatible with World-Stream. Some popular options include SAM Broadcaster, RadioBOSS, and Virtual DJ.
World-Stream, you will receive the Email streaming details such as the server address, port number, and stream password.
3. Configure Your Encoder: Enter the streaming details into your encoder software. Here’s a general guide on how to configure some popular encoders:
SAM Broadcaster
1. Open SAM Broadcaster.
2. Go to `Encoders` and click the `+` button to add a new encoder.
3. Select `MP3 (LAME_ENC)` or another format supported by World-Stream.
4. Click `OK` and then configure the encoder settings:
- Server Type: Choose `Shoutcast` or `Icecast` based on your World-Stream server.
- Server IP: Enter the server address provided by World-Stream. - Port: Enter the port number provided by World-Stream.
- Password: Enter the stream password provided by World-Stream. - Station Name: Enter your station name.
5. Click `OK` to save the settings.6. Start the encoder to begin streaming.
RadioBOSS
1. Open RadioBOSS.
2. Go to `Settings` > `Broadcast`.
3. Click `Add` to add a new broadcast.
4. Configure the broadcast settings: - Type: Choose `Shoutcast` or `Icecast` based on your World-Stream server.
- Server: Enter the server address provided by World-Stream.
- Port: Enter the port number provided by World-Stream.
- Password: Enter the stream password provided by World-Stream.
- Mount Point: (For Icecast) Enter the mount point if required.
5. Click `OK` to save the settings.6. Start the broadcast to begin streaming.
Virtual DJ
1. Open Virtual DJ.
2. Go to `Settings` > `Broadcast`.
3. Click `Start Broadcast`.
4. Configure the broadcast settings:
- Server Type: Choose `Shoutcast` or `Icecast` based on your World-Stream server.
- Server: Enter the server address provided by World-Stream.
- Port: Enter the port number provided by World-Stream.
- Password: Enter the stream password provided by World-Stream.
- Mount Point: (For Icecast) Enter the mount point if required.
5. Click `OK` to save the settings.
6. Start the broadcast to begin streaming.
General Steps for Other Encoders
1. Open your encoder software.
2. Locate the settings or configuration section for streaming.
3. Enter the server address, port number, and stream password provided by World-Stream.
4. Save the settings and start the encoder to begin streaming.
For more detailed instructions, you can refer to the documentation of your specific encoder software or visit the World-Stream FAQ for additional support.
